Roll over image to zoom in · Click to see full view
Product information
From the manufacturer
About this product
- Managed L3 Web-based management
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 24 Console port: RJ-45
- 10G support
- MAC address table: 16384 entries Switching capacity: 128 Gbit/s
- Access Control List (ACL)
- 1U Rack mounting Stackable
- AC Power supply included Power over Ethernet (PoE)
The HPE Networking Comware Switch Series 5140 EI delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, HPE Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP; convenient fixed 10 GbE uplink ports, PoE+, ACLs, and IPv6; and delivers energy savings with Energy Efficient Ethernet. The HPE Networking Comware Switch Series 5140 EI also includes Smart Management Center (SmartMC), an embedded network management tool that can be leveraged at no additional cost by small and medium networks for centralized management and operations. The series can also be managed with HPE Aruba Networking IMC for a single view of your entire network.
What is new supporting point:
Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10 GbE uplinks, and POE+ models for voice, video, and wireless.
It supports IRF technology that enables plug-and-play device aggregation and link aggregation across multiple devices, enhancing network redundancy and resource utilization.
It includes embedded network management capabilities with Smart Management Center (SmartMC).
It includes energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down unused ports.
Product details
40
| AC input frequency | 50 - 60 Hz |
|---|---|
| AC input voltage | 100 - 240 V |
| Authentication | MAC-based authentication |
| Authentication type | RADIUS |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Console port | RJ-45 |
| DC input voltage | 54 - 57 V |
| DHCP features | DHCP server |
| Dimensions (W x D x H) (imperial) | 43.7 x 439.9 x 260.1 mm (1.72 x 17.3 x 10.2") |
| Flash memory | 256 MB |
| Form factor | 1U |
| Internal memory | 512 MB |
| I/O ports | 24 RJ-45 autosensing 10/100/1000 ports with 4 combo ports (RJ-45 or SFP); 1 RJ-45 serial console port |
| IPv4 FIB entries | 512 |
| IPv6 FIB entries | 256 |
| Latency | 1000 Mb latency: < 5 μs 10 Gbps latency: < 3 μs |
| Latency (10 Gbps) | 5 µs |
| Latency (1 Gbps) | 5 µs |
| MAC address table | 16384 entries |
| Memory and processor | 512 MB SDRAM, 256 MB flash |
| Memory type | SDRAM |
| Networking standards | IEEE 802.3at |
| Operating relative humidity (H-H) | 10 - 90% |
| Operating temperature (T-T) | -5 - 45 °C |
| Performance management | HPE Aruba Networking IMC - Intelligent Management Center; SmartMC; Command-line interface; Web browser; SNMP manager |
| Physical stacking (units) | 9 |
| Power consumption (max) | 451 W |
| Power consumption note | 451W (Maximum), 30W (Idle) Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. When supplemented with the use of an HPE RPS1600, up to 740W of PoE+ can be supplied. Maximum current rating for DC power is 25A. AC input power is 30W typical and... |
| Power source | AC |
| Power supply note | At least 1 power supply is required (not included, must be ordered separately) |
| Routing protocols | OSPF, OSPFv2, OSPFv3, RIP, RIP-1, RIP-2 |
| SFP+ module slots quantity | 4 |
| Storage temperature (T-T) | -40 - 70 °C |
| Switching capacity | 128 Gbit/s |
| Switch layer | L3 |
| Switch type | Managed |
| Throughput | 95 Mpps |
| Total Power over Ethernet (PoE) budget | 370 W |
| Weight (imperial) | 4.5 kg (9.92 lbs) |
Logistics
| EAN | 0190017499406 |
|---|---|
| Unit of measure | — |
| Weight | — |
| Dimensions | — |
| Dangerous goods | No |
Warranty
- 12-month warranty on everything we sell.
- Runs from the day your order is delivered.
- Faults under normal use are repaired, replaced or refunded.
Payment
- Visa and Mastercard, processed securely by Tyl by NatWest with 3D Secure.
- PayPal — your PayPal balance or a saved card or bank account.
- Clearpay, Klarna and Billie — pay later or in instalments, processed by Stripe.
- No surcharge on any payment method; refunds go back to the way you paid.
Spread the cost
-
-
- Businesses: pay in 30 days on invoice with Billie. Learn more
Choose at checkout. 18+, T&Cs apply, credit subject to status.
You might also like
Recently viewed
