‹ Back to products
Brand: Kingston Technology

KF316C10BBK2/8

Kingston Technology KF316C10BBK2/8

Backlight No
CAS latency 10
Component for PC/Server
Cooling type Heatsink
Country of origin Taiwan
Depth 7.1 mm

About this item

FURY KF316C10BBK2/8 is a kit of two 512M x 64-bit (4GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing...

View full product description

Product information

About this product

  • JEDEC standard 1.5V Power Supply
  • VDDQ = 1.5V
  • 800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • Height 1.338” (34mm) w/heatsink

FURY KF316C10BBK2/8 is a kit of two 512M x 64-bit (4GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 240-pin DIMM uses gold contact fingers.

Product details

25
Backlight No
CAS latency 10
Component for PC/Server
Cooling type Heatsink
Country of origin Taiwan
Depth 7.1 mm
ECC No
Harmonized System (HS) code 84733020
Height 34 mm
Internal memory 8 GB
Internal memory type DDR3
JEDEC standard Yes
Linux operating systems supported Yes
Memory channels Dual-channel
Memory form factor 240-pin DIMM
Memory layout (modules x size) 2 x 4 GB
Memory voltage 1.5 V
Module configuration 512M x 64
Operating temperature (T-T) 0 - 85 °C
Refresh row cycle time 260 ns
Row active time 37.5 ns
Row cycle time 48.125 ns
Storage temperature (T-T) -55 - 100 °C
Width 133.3 mm
Windows operating systems supported Yes

Logistics

EAN0740617318142
Unit of measure—
Weight—
Dimensions —
Dangerous goodsNo

Warranty

  • 12-month warranty on everything we sell.
  • Runs from the day your order is delivered.
  • Faults under normal use are repaired, replaced or refunded.
Read the warranty terms

Payment

  • Clearpay
  • Klarna
  • Visa and Mastercard, processed securely by Tyl by NatWest with 3D Secure.
  • PayPal — your PayPal balance or a saved card or bank account.
  • Clearpay, Klarna and Billie — pay later or in instalments, processed by Stripe.
  • No surcharge on any payment method; refunds go back to the way you paid.
Read the payment policy
Spread the cost
  • Clearpay
  • Klarna
    • Clearpay
    4 interest-free payments of £10.08 with Clearpay. Learn more
    • Klarna
    3 payments of £13.43 at 0% interest with Klarna. Learn more
    Businesses: pay in 30 days on invoice with Billie. Learn more

Choose at checkout. 18+, T&Cs apply, credit subject to status.

Return policy: Item can be returned in its original condition for a full refund within 14 days of receipt, with a free tracked Royal Mail return label. Read full return policy