Roll over image to zoom in · Click to see full view
Product information
From the manufacturer
About this product
- HARD DRIVE DOCKING STATION: This 2-bay hard drive dock enables access to 2.5/3.5" SATA and IDE hard drives for file backup, disk imaging, or data transfer over USB 3.2 Gen 1 (5 Gbps); Toolless design facilitates quick drive hot-swapping
- DRIVE COMPATIBILITY: Supports 2.5/3.5" SATA I/II/III SSDs/HDDs and IDE HDDs (40 pin, EIDE/PATA); OS independent - Includes 4.7" (12cm) IDE, LP4, and 3ft (1m) USB-A cables and universal power adapter
- PERFORMANCE: Power and eject buttons for each bay enables hot-swapping of an idle drive while the other bay is in use; Dedicated slots for SATA (slot 1), and IDE (slot 2); Drive bays with 15,000 insertion/removal cycle rating for maximum durability
- SPECS: 2-Bay Hard Drive Dock; SATA I/II/III and IDE (40 pin, EIDE/PATA 66/100/133 MBps); USB 3.2 Gen 1 (5 Gbps) Host Connection; Toolless Design; Hot-Swappable Drive Bays; Top-Loading with Eject Button; LED Activity Lights
External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA III and IDE
The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.
Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.
A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).
The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
Product details
40
| AC adapter included | Yes |
|---|---|
| AC input voltage | 110-240 V |
| Built-in fan | No |
| Cables included | USB |
| Certification | CE, FCC |
| Chipset | JMicron - JMS561U, JMD330 |
| Compliance certificates | RoHS |
| DC-in jack | Yes |
| Depth | 147 mm |
| Height | 70 mm |
| Host interface | USB 3.2 Gen 1 (3.1 Gen 1) Type-B |
| Hot-swap | Yes |
| Input current | 1.3 A |
| LED indicators | Activity, Power |
| Manual | Yes |
| Material | Plastic |
| Maximum data transfer rate | 5 Gbit/s |
| Maximum storage capacity | 6 TB |
| Mean time between failures (MTBF) | 30000 h |
| Number of storage drives supported | 2 |
| Operating relative humidity (H-H) | 8 - 90% |
| Operating temperature (T-T) | 5 - 80 °C |
| Output current | 3 A |
| Output voltage | 12 V |
| Package depth | 213 mm |
| Package height | 122 mm |
| Package weight | 1 kg |
| Package width | 189 mm |
| Plug and Play | Yes |
| Power plug type | Type M |
| Product colour | Black |
| RAID support | No |
| Storage drive interface | Parallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III |
| Storage drive sizes supported | 2.5,3.5" |
| Storage media type | HDD, SSD |
| Storage temperature (T-T) | -40 - 70 °C |
| UASP support | Yes |
| USB 3.2 Gen 1 (3.1 Gen 1) ports quantity | 1 |
| Weight | 500 g |
| Width | 130 mm |
Logistics
| EAN | 0065030859813 |
|---|---|
| Unit of measure | — |
| Weight | — |
| Dimensions | — |
| Dangerous goods | No |
Warranty
- 12-month warranty on everything we sell.
- Runs from the day your order is delivered.
- Faults under normal use are repaired, replaced or refunded.
Payment
- Visa and Mastercard, processed securely by Tyl by NatWest with 3D Secure.
- PayPal — your PayPal balance or a saved card or bank account.
- Clearpay, Klarna and Billie — pay later or in instalments, processed by Stripe.
- No surcharge on any payment method; refunds go back to the way you paid.
Spread the cost
- 4 interest-free payments of £16.92 with Clearpay. Learn more
- 3 payments of £22.56 at 0% interest with Klarna. Learn more
- Businesses: pay in 30 days on invoice with Billie. Learn more
Choose at checkout. 18+, T&Cs apply, credit subject to status.